FLIR Mobile Developer / Blog / Topics / Calibration / How to stop automatic calibration

How to stop automatic calibration

Home Forums FLIR Mobile SDK Development iOS Development How to stop automatic calibration

Tagged: 

This topic contains 10 replies, has 3 voices, and was last updated by Profile photo of Jack Jack 1 month, 1 week ago.

Viewing 11 posts - 1 through 11 (of 11 total)

  • Author

    Posts

  • #30028

    Profile photo of Koji
    Koji

    Participant

    Hello.

    In FLIR One SDK for iOS, I would like to stop automatic calibration.
    I have checked API Specification, and I can find the way to confirm the calibration state by “FLIR Calibration” and “FLIRRemoteControl”, but I cannot find the way to stop automatic calibration.

    If this is no way, I would like to know how to change the period at which automatic calibration is performed.

    Regards.

    #30050

    Profile photo of Gavin
    Gavin

    Keymaster

    Hi Koji,

    I want to confirm you’re using the FLIR Mobile SDK Version 1.5.0.

    Best,
    Gavin
    FLIR Community Support

    #30064

    Profile photo of Gavin
    Gavin

    Keymaster

    Hi Koji,

    I want to confirm you’re using the FLIR Mobile SDK Version 1.5.0.

    Best,
    Gavin
    FLIR Community Support

    #30244

    Profile photo of Koji
    Koji

    Participant

    Hi Gavin,
    Thank you for your response.
    I am using the FLIR Mobile SDK Version 1.3.0.
    If I use the SDK Version 1.5.0, Can I stop automatic calibration ?
    And I want to know the difference between 1.3.0 and 1.5.0.

    Regards,
    Koji

    #30264

    Profile photo of Koji
    Koji

    Participant

    Hi Gavin,
    I confirmed the document of SDK Version 1.5.0, I found API that set nucInterval.
    I use newest SDK.
    Could you let me know if there is sample source for setting nucinterval ?

    Regards,
    Koji

    #30325

    Profile photo of Koji
    Koji

    Participant

    Hi,
    I was able to stop the automatic calibration by changing the SDK 1.5.0.
    Thank you very much.

    I would like to know an interval seconds that FLIR One PRO should execute calibration.
    And I want to know the effect of not performing the calibration for a long time.
    And I want to know how long it takes for the measured temperature to stabilize when FLIR One PRO first turns on.

    Regards
    Koji

    #31530

    Profile photo of Koji
    Koji

    Participant

    Hello, Gavin.

    I am so sorry that I urge you many time.

    I would like you to let me know SOON the effect by stopping the automatic calibration and the interval that I should set.

    Regards,
    Koji

    #31545

    Profile photo of Gavin
    Gavin

    Keymaster

    Hello Koji,

    Firstly, I want to apologize for the delay in responses. I see you currently have 3 requests on three different topics. Would it be possible to combine all three of these questions into a single support ticket here ? This will make the efficiency in answering your questions much higher and I should be able to resolve your questions in the next 2-3 days.

    Best,
    Gavin

    #31559

    Profile photo of Gavin
    Gavin

    Keymaster

    Hello Koji,

    Firstly, I want to apologize for the delay in responses. I see you currently have 3 requests on three different topics. Would it be possible to combine all three of these questions into a single support ticket here ? This will make the efficiency in answering your questions much higher and I should be able to resolve your questions in the next 2-3 days.

    Best,
    Gavin

    #31610

    Profile photo of Koji
    Koji

    Participant

    Hello, Gavin
    Thank you for your response.
    I can combiine all three of these questions into a single support ticket.
    I will send the ticket to Technical Support Center.

    Thank you
    Koji

    #32672

    Profile photo of Jack
    Jack

    Participant

    😊

Viewing 11 posts - 1 through 11 (of 11 total)

You must be logged in to reply to this topic.